This masterpiece of plywood, duct tape, and cardboard is the end result of my day. The two pieces in front are templates for the supports that will be behind the backrest, supporting it and dividing it into sections. There will be three separate section, each about two feet long, with access hatches of some (undecided) type to access this new storage. The forward 2/3 comes up even with the shelf and the back 1/3 is up to the top.
Before bringing this thing home and tracing it out on plywood, I want to bring the cushions out to make sure my measurements are correct and it will look OK. Eventually, the parts of this visible above the back cushion will be covered with 1/4" plywood and stained.
No comments:
Post a Comment